Join our mailing list!

Acceptance Mark
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
 
 
 
 
 


(Your shopping cart is empty)

  Home > ICE EATER / DEICER / HEATER >

  BOATSAFE 250W ENGINE COMPARTMENT HEATER 150 CUBIC FT
  The BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller marine engine compartment applications. (For engine compartments up to 150 cu.ft.) JR-250W
The BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller marine engine compartment applications. (For engine compartments up to 150 cu.ft.) JR-250W
The BoatSafe Jr. - 250 Watts of Forced Air Heat - Designed for smaller engine compartment applications. (For marine engine compartments up to 150 cu.ft.)
 
The BoatSafe Jr. - 250 Watts - JR-250W

List Price: $399.00
MAP Price $349.00
Add to cart for lower price


Stock Status: In Stock

Product Code: 25144


Description
 
BoatSafe Jr. - 250 Watts of Forced Air Heat - Model JR-250W

Designed for smaller marine engine compartment applications. (For engine compartments up to 150 cu.ft.)

Boatsafe Engine Compartment Heater 250w will extend your boating season - Helps Keep Engine(s) and Wiring Dry and Corrosion Free. Helps Extend Battery Life - Allows batteries to deliver full starting power in cold weather. 
 
Features
(For Engine Compartments of 150 cu. ft. or less)
(Boats with single engine, up to 24', or most sailboats)

NOTE: This heater WILL NOT provide adequate
protection for a boat that is stored out of the water on a lift, or on a trailer.



UNIT DIMENSIONS:
  • 51/2"H x 41/2"W x 141/2" L - 1" Mounting Bracket at each end of unit. Weight - Approximately 4 lbs.

UNIT ENCLOSURE:

  • 16 Ga. aluminum. Designed for exceptional strength and long life. CAD Vents for proper air flow and maximum heat distribution. Fully Powder Coated for scratch and corrosion resistance.
HEATING ELEMENT:
  • 250W, Cast Alloy, completely sealed, specially designed and engineered for this application. Cast Alloy provides excellent corrosion resistance. Vibration resistant. Will not spark. UL recognized.

THERMOSTAT CONTROL:
  • Hermetically sealed. Factory calibrated and pre-set to activate heater unit when ambient air temperature falls below 45 F (approximately), and continue operation until ambient reaches 55 F (approximately). FM approved.
FAN:
  • Heavy Duty, computer style induction fan. Rated at 21 CFM. UL recognized. CSA certified.
POWER CORD:
  • 15' - Rated 13A, heavy duty service. Includes a molded 3 prong plug. UL and CSA recognized.
UNIT DRAW:
  • Approximately 2.2A at 120V.
BTU OUTPUT:
  • 860 BTU
COST TO OPERATE:
  • $.02/Hr. (Based on Average Electricity Cost of $.08/KWH)
Helps Keep Engine(s) and Wiring Dry and Corrosion Free.Helps Extend Battery Life - Allows batteries to deliver full starting power in cold weather.Enhances the Resale Value of Your Boat - An installed BoatSafeŽ increases your boat's value.Saves Money by Eliminating the Annual Costs of Winterizing & Dewinterizing your engine(s) in some climates.The BoatSafeŽ Marine Engine Compartment Heaters are designed and manufactured to meet U.S. Coast Guard Ignition Protection Standards.Constructed with UL and CSA Certified and Recognized, and FM Approved Components.
Full One Year Warranty, plus a manufacturers "Lifetime Service Guarantee".



 Share your knowledge of this product with other customers... Be the first to write a review.


AGI Products/Marine Wiz
2227 US Highway 1, #247
North Brunswick, NJ 08902
 About Us
 Become an Affiliate
 Privacy Policy
 Contact Us
 Return Policy
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2005-2008 AGI Products Corp. All Rights Reserved.
Ecommerce Solutions powered by Volusion.